Meanwhile there is a tropical storm moving in tonight. Finally, a typical summer… At least we need the rain desperately…
Meanwhile, I launched another pattern for download. And I’m beginning to add Lookbooks for some of the patterns. I’ve had a number of requests from potential buyers to see what people are doing with the patterns. I know this is a thing on Ravelry, and it does help to see what people do with the pattern, and how it fits all different body types. This is one more thing on my never ending to do list, but I’ve managed to post three of them, one for the vest below, and one for the 700/1700 tunics and the 100 jacket. I don’t know if it helps, and obviously the patterns are too new for purchasers to show what they’ve done with them, but I’ve been using these patterns for years, especially the jackets, and I have a collection of mostly in progress, not completely finished versions from all of my workshops.
What’s important here is that if I used a photo of you in your garment, I cropped all body parts, so you wouldn’t be recognized. Still, if you object to my using your garment, please let me know. And if you have a photo of a garment you made in one of my classes and/or from one of my patterns, especially a finished version, please let me know at theweaver@weaversew.com
The 800 Zippered Vest is fully lined to the edge and has bias bound edges. The vest has a stand-up collar with front separating zipper. View 2 uses the lining as a seam finish on the side, shoulder and neckline/collar seams. Optional yoke on both views. This pattern does not contain directions for sewing. The directions, which contain metric equivalents are available for free from my website https://www.daryllancaster.com/Webfiles/800ZipperedVestDirections.pdf
In addition, a lookbook of garments made from the 800 Zippered Vest is available here https://weaversew.com/wordblog/800-zippered-vest-lookbook/
I’ve only got one more pattern to go in the current collection, which will give me a total of 12! The pattern for the 1800 jacket is done, it is a combination of the 800 zippered vest above and the 400 jacket with waist darts. The directions are rewritten, I’m waiting for the final edits from someone I hired to make sure what I wrote makes sense. The conversations between us are hilarious. Usually she writes that something doesn’t make any sense, and I respond that it would have it they were in class because there would have been an entire class lecture on the fine points of that technique earlier in the morning, and then she responds that people who buy the patterns won’t have been privy to that lecture, so I have to spell it all out. So I’ve added so much to each of the directions for each of the patterns. I keep them separate because whenever something is unclear, I can edit easily and post on a page of my website, without generating an entire new pattern download. The directions are always free, so if you already traced a pattern from one of my classes and need the updated directions, please find them here. As always, if something isn’t clear, please let me know, I’ll try to fix it. And there is the goal to have a YouTube channel to explain many of the techniques I feature in my patterns.
Meanwhile I’m already thinking of how to combine the patterns and what silhouette I want to work on next. A scoop neck top with sleeves…
Meanwhile, I met with a consultant about video equipment and improving the image of my online teaching via Zoom or whatever platform works for the guild hiring me. And they are hiring me. My October Calendar is really filling up with remote guild lectures and a few short workshops. I’m beginning to get cancellations from next year, and I’m really good with that because I don’t see us returning to a normal any time soon. I don’t see me hopping on a plane, dragging 170 pounds of luggage, staying with people, and teaching a 5-7 day class working intimately with students, and returning safely to NJ. Right now there is a list in NJ of 31 states that you have to quarantine from after traveling to… So I’ve edited some of my lectures to list what can be done remotely. I will start on the half day seminars shortly.
So I now have a couple of Canon SLR’s that actually were designed to also work as webcams, in addition to 4K video. I have an AC battery adapter so the camera battery doesn’t die in the middle of a zoom meeting. I have my tech guy coming this week to run an ethernet cable to the garage weaving studio so I don’t have to rely on WIFI. I have the cable company coming to upgrade my modem so I can get 1GB of internet speed. And I purchased a sound system and video lights for recording videos, all that of course contingent on my daughter, who works for me now, learning how to use them. Right now she is creating a logo.
Meanwhile, I’ve mentioned my long time association with Silk City Fibers, which is now a division of Lion Brand Yarns. Alice, who is the director of that division is an old friend and coincidently lives in my town. We are in regular contact about what’s new there and my opinion of the market, the type of yarn, the marketing, and anything else that comes to mind. Last week I was asked if I wanted to be a “weaving influencer”. I suppose I am an influencer. A few thousand friends on facebook, been teaching this stuff since the early 80’s and using their yarn since then as well. I’ve been blogging for more than 10 years, have about a thousand subscribers, and earlier posts have been viewed thousands of times. And of course I always have an opinion. I’m not always right, but my opinion always comes with a thought process that shows how I got there. I met with the powers that be at Lion Brand, via remote conferencing, and largely I said, if you want to toss me yarn, I’ll make yardage out of it, document what I do and what it does, and make clothing out of it to sell my patterns.
And so, at the end of last week, Alice dropped off a small bag of assorted cones, two of them yarns I’d not worked with before. Left to right is Nile, a cotton tape yarn, Cotton Bambu, a heavier parallel plied yarn, great for supplemental work, Linen 14, a fine linen yarn I’ve had experience with before, and Bambu 7, bamboo yarn, pretty much a SSF staple. There was about a half pound of each, which doesn’t seem like a lot to work with, especially if the goal is yardage. But that never stopped me.
I thought about the yarn, and then looked through my stash to see what I could add that was part of their current line. Not much, since my shelves are full of older discontinued styles and colors of Silk City Yarns, all wonderful, but I thought I’d try to stay current. I was able to add these. Clockwise from upper left, Saphira, Skinny Majesty Variegated, and a possible weft, Bambu 7
First I had to figure out exactly what I had. I use a McMorran Yarn Balance and a scale and I can come within a few yards of knowing what’s on the cone.
I played with yarn wraps…
…and adapted the draft from Chaos, which you can purchase from my website here…
…and came up with something that reminded me of summer rain. Think Tropical Storm Isaias.
Meanwhile, I haven’t actually wound a warp or set up a loom since the huge studio move last winter, which seems at this point like a lifetime ago. When I returned from Oregon the beginning of March, the heat had just been installed, but the entire world shut down, and I dug in and made a bunch of new garments, in the basement sewing room, still thinking I had to submit five new works for the Convergence Fashion Show as a guest artist (of course that conference was postponed until 2022). And I started on what seemed like an impossible task at the time, creating downloadable patterns from the ones I developed for classes. I was sitting on a lot of handwoven yardage I had stockpiled, and now my stash is depleted.
So I did what I do best. Create with a small pile in front of me, and see where it takes me…
First up was winding the warp. There are many ways to wind warps, but I wanted to see the colors unfold, so I chose to just do a straight wind off of the draft, as opposed to winding individual chains of each color. The winding was slow, but the sleying would be much faster. The first thing I discovered was the Nile tape lace had to be unwound from the cone like a toilet paper roll, instead of off the top, like typical coned weaving yarns. When exiting from the top, the tape seriously twisted and I knew would never lay moderately flat in the woven surface. So I put the cone on a spool rack, with the rack facing away from me at about a 30 degree angle. The cone unwound easily in that position.
Next hurdle was of course the dreaded slippery rayon, and Silk City Fibers has lots of these. I’ve used them for years. This was one called Saphira, a pretty shimmery yarn with slubs. The color I had has actually been discontinued, but a similar one is available with a black core instead of a white one. Winding a warp with a yarn like this is problematic because any break in movement, like the turn around at the top of the warping mill, causes the yarn to pool around the base, getting caught as the movement resumes. I usually use a nylon stocking around the cone as a drag, which works really really well, except in the move, they are hiding and I can’t figure out where they went. So I used the mesh covering from an Asian Pear, which when tucked around the base, stopped the pooling and the warping could continue.
I loved the way the colors built on one another.
By dinner time yesterday I had the loom’s beater sleyed. Each of these steps was sort of like reinventing the wheel. The chair I usually used for sleying was now in the basement in my sewing studio. So I had to come up with new tools and devices, figure out where my regular tools were now living, figure out where to plug in the magnifying light (in the ceiling as it turned out), and how to adjust the split HVAC system that was spilling copious amounts of frigid air right on me. I figured that out and the room was really comfortable. The new studio worked well. I’m happy and can’t wait to actually spend most of my days out there even when I’m Zooming…
I started threading after dinner.
Meanwhile, my beloved brat of a dog Ranger got his manhood clipped last Monday. He was very depressed and had to wear the “innertube of misfortune”. And of course, that meant he couldn’t wear a bellyband, so my fear all week was that he would pee on everything in my house. We were good until late last night. He saddled up to a shelving tower of handdyed yarn skeins and lifted his leg. So I got to use the new dye sink in the studio and wash all of the offended skeins as I cleaned up the mess. The dye sink worked really well. And incision or no incision, he is now wearing a belly band. The relationship between the two males dogs is slowing changing, it will be interesting to see where this goes. The week for the most part wasn’t nearly has challenging as I thought it would be. I got a lot accomplished locking myself and the dog in my office for hours at a time while he healed. He liked the constant companionship.
Meanwhile, did I mention we are getting hit with a tropical storm tonight? Note to self, pull in anything that isn’t nailed down, like umbrellas, etc. Better yet, send Brianna out to do it…
Stay tuned…