Spring is coming…

…and I’m weaving as fast as I can…

I suppose it is a good thing that there is still a foot or more of packed ice covering all of northern NJ. And of course my gardens. And half my driveway (well that part isn’t so great). I try to spend each day chipping away at the ice piles in the driveway. But the gardens I’m told are fine. Snow is an insulator, and all will be well when it finally all melts. The good news is that may take a while, and there is nothing for me to do in the gardens until I see the actual ground. Which means I have some more time inside before I have to venture outside.

I’m still slogging my way through the natural dye class through Maiwa. Each of the saved batches of dye are being reused to exhaust them, no sense tossing perfectly good dyepots. I’ve got a routine, including exhausting the exhaust baths… Don’t ask! I think I counted so far that I will have done more than 75 dyebaths. And I haven’t gotten to the indigo yet.

I finished the 8-shaft Shadow Weave scarves, design from Webs, I put the link in the last post. They are sitting in my closet waiting for the guild sale.

I kept at the 12-shaft towels my daughter started years ago. I wanted that warp off. Good thing I have such good leg and upper back strength from weaving on this monster loom, because I need it shoveling mounds of icy snow.

Pretty soon, the sight every weaver longs for…

And I cut the roll of towels off the loom, and left them for my daughter. They are really hers.

Then I took my 12-shaft Voyager Table loom, (did I mention I hate table looms?) and slowly started to transfer the echo weave draft I got from Denise Kovnat, onto the 12-shaft floor loom. I wanted to finish one last warp before this loom moves to FIT in NYC. I knew I’d never get to weaving off this complex Tencel warp on the table loom, so I started sleying the reed of the floor loom, directly from the table loom.

I got all 574 ends threaded, 36 ends per inch.

And then releasing the brake on the table loom, I wound through the four yards onto the floor loom.

And I will admit, it took a while to get the sheds clean on all 12 treadles, lots of tweaking, but once I spent the time on it, it is weaving beautifully. I love this pattern. And I love that it is a single shuttle weft. My kind of weaving.

And just today… Knots… This makes me so happy. Probably one more repeat…

I pulled a box of sheepskin fur scraps from the attic, I’m making a medieval brocade vest, and I’ll line it with the sheepskin pieced together. It only took the cat about 10 minutes to find the box, and now it is his favorite place to rest.

I think I want to come back in another life as one of my animals…

I got my latest Shuttle, Spindle and Dyepot last week. It is the publication for the Handweavers Guild of America. I casually opened the front cover and there I was, with all these young faces, part of the Careers in Textiles symposium sponsored by the Handweavers Guild of America. I was reluctant at first to be a part of it, because the path I took to become who I am doesn’t really exist anymore. But then I thought about it, and it isn’t about the path, it is about seizing opportunities and learning everything I could about each of the components that helped me earn a living as an artist, handweaver, writer, and educator. So I’m the artist, handweaver, writer and educator on the panel. It happens in March. I have started writing my presentation, which I have so much fun with…

And I practice like a crazy person every day, cello and recorders, and a week ago Friday I had a performance with one of my groups, the Mendham Consort for the Folk Project. We played a colorful version of Greensleeves, which is a song about unrequited love, from the 16th century, at a concert featuring love songs for Valentine’s Day. It was so much fun. That’s me in the center, standing, playing bass recorder. Seated next to me is my cello teacher Loni Bach.

And one of my groups, New Jersey Early Music, has its spring concert on March 22, which is coming up soon, less than 4 rehearsals to go. I’m playing cello and bass recorder for that one.

And I was just asked to record a podcast with the SweetGeorgia Yarn company, out of Vancouver. I’m always up for a podcast. I looked at their yarns, all handdyed or handpainted. They are gorgeous.

So life is of course spiraling out of control, which is all fine. I choose all these fun things, and they sometimes collide, but I have a breather before I have to get outside and work in the dirt. In the next couple of weeks, two more looms will be gone from my studio. The 12-shaft Voyager Table loom is heading to Michigan to my weaver friend there, and the 12-shaft 54″ Tools of the Trade is heading to NYC to the weaving lab at FIT. And at the Shakespeare Theatre of NJ, we are working on costuming four shows at once. And this is the off season. My weekly volunteer day there is chocked full of entertaining sewing.

Stay warm my faithful readers, and stay tuned…

One repeat at a time…

Or one row at a time, or one module at a time, or one inch at a time…

There is a great saying, used well by 12-step groups, “One Day at a Time…” The theory is that you can accomplish anything if you just take it one day, or even one minute at a time. I’ve lived by those words for my entire adult life, and it is how I accomplish much of what I set out to do…

This is a new year. And though I almost never set resolutions for myself, this year I have a number of goals. Continuing to clear looms is high on the list, but the most important one, is to finish the online class I started in Natural Dyeing with Maiwa. I signed up back in 2024, it was an expensive class, and I bought the kit, with all the fabrics, dyes, chemicals, tagging sheets, everything needed to take the class. It was shipped from Canada. I have three years to complete the course. I’m already half way into that time restriction. So this dark cold January, when I thought the music rehearsals and performances would ease up (Hahahahahah… what was I thinking…) that I could really take the time to work through all the modules, one a day.

I am actually doing well, I’m more than half finished the class, and have a lovely array of wool yarn, wool fabrics, and silk jacquard all dyed with natural dyes. Each of those skeins/fabrics, will then be cut into more pieces to experiment with modifiers, indigo overdyes, etc. The class is fantastic. Worth every penny I spent. Directions and videos are exceptional, and I look forward to cranking up the dye pot every morning.

My only complaint, and it is a humorous one, and I was warned, all the dye baths need to be saved for exhaust dye studies. So my basement refrigerator looks like this, and I haven’t even gotten to the cotton/linen/hemp module. It is hard to find large ball jars in the middle of winter…

I’ve already written in a previous post how I’m not great at babysitting pots on the stove, so I went to the loom with the Shadow Weave Sampler, in 8/2 Tencel, and I’d weave one section of one repeat, get up and check the temp on the dyepot, and stir, and then go back and weave another section of one repeat. After a couple of weeks of this, I finished two 2-yard scarves, and have enough warp left for a few more repeats, which I’ll use for zippered bags next fall for the guild sale. The pattern is from Webs.

Meanwhile, this morning it snowed. We got about 4″ of heavy wet snow, which I had to clear pretty quickly, because in NJ, temps drop at night, causing everything to freeze and turn to ice. But I made myself a deluxe grain bowl and sat by my garden window in the music room and watched the falling snow. It was beautiful.

Meanwhile, I had transferred the warp from one of my little Structos, which was set up for Doup Leno. I put it on one of my small 4-shaft floor looms. With a single shuttle, I blew through that warp in a couple sittings. Though it was painfully slow to twist all that fringe.

I had actually cleared that loom back in November or December and put on a run of Monk’s belt towels, which I talked about in my last blog post, from the latest issue of Handwoven Magazine, and blew through them in record time, which gave me a nice stack for holiday gifts.

The loom I was weaving on, sits tucked into a corner next to a shelving unit, and hanging from that shelving unit were two very large skeins of hand painted cotton, which kept getting in the way when I’d reach back to adjust the back brake. In disgust, I pulled the skeins from the side of the shelving unit, and then got distracted, thinking, how much fun would it be to weave up some yardage, using a draft I developed for Silk City Fibers, using a similar fat cotton floating over a finer ground. The draft is on my website, and is free.

It was great fun to go shopping in my stash. I refuse to ever buy yarn again, I have so much, and I pulled things that made the hand painted warp sing.

I went right to the warping board, once I finished all the towels, cut them off, washed and hemmed them, and gave them all away.

There is a fine thread of purple glitter yarn, which must have been something my daughter acquired because I can’t imagine ever buying purple metallic.

I am in the process of threading the heddles, again, a couple inches at a time, in between weaving off the shadow weave, and watching the next module for the Maiwa class. I’m more than half way, and can’t wait to beam this and start weaving to see what it looks like. Patience…

When I showed my weaving buddies the photo of the warp, my friend Ginnie, who lives on the Upper Peninsula of Michigan, where they are up to 137″ of snow, that is not a typo, sent me a gorgeous photo of a winter sunset, that looks exactly like the palette of my yarn choices.

Meanwhile, last Saturday I had a performance with one of my Early Music Groups, this one for a Viking coronation ceremony. It was so much fun, I played cello mostly, and we all got dressed up in our medieval garb, and played our hearts out, all through the ceremony. There was a wonderful Viking feast afterward, with all foods that would have been cooked back in the Viking period.

Meanwhile… first the back story… My daughter, many of you know, is a terrific weaver. Before Covid, she was even thinking of going into life as a craftsman, between the knitting machines, and the looms, five of the ones in the studio are hers, and we started teaching together, and planning to move in the direction of a mother/daughter team. Then Covid hit, and everything got cancelled, I don’t have to tell you dear readers, that so many people, including me, changed the direction of their lives as a result. I had hired my out-of-work daughter, to figure out how to do a YouTube channel, we bought the equipment and filmed more than 75 videos, one a week for more than a year and a half. It is called, The Weaver Sews, and if you haven’t checked it out at this point there is a tremendous amount of information on Sewing Handwoven Fabrics. It is everything I know.

Anyway, my daughter went on to finish her vet tech degree, and after a couple of different positions at vet practices, she now works the night shift as a critical care vet tech and sleeps all day. She loves the job, and the career, and spends her days, when she is not asleep doing things she loves, watching TikTok, playing video games, building small kits she finds online, and creating a life very different than mine. I have no judgement here, I miss her in the studio, but in our discussions, she has mostly just lost the passion she once had. It may come back, but it isn’t my life or my place to push her to do that which no longer defines her. She has a really tough career, some of the stories she tells are devastating. She does what she needs to do for her sanity. As I do mine…

One of my long term goals is to completely downsize my entire studio, move out things that no longer interest me, and though I’m down to under 30 looms, from my previous high of 64, I still have a long way to go to clear and find teaching homes for my equipment. I cannot keep a studio with 30 looms in the hopes that someday my daughter will want to return to my passion.

In 2021, my daughter loaded a trailer onto the SUV, and drove to Rochester NY to pick up a loom that had become available, a 12-shaft 54″ wide Tools of the Trade Loom. I wrote about the adventure here. It is a monster loom, originally from the Rochester Institute of Technology, which closed its weaving program some time ago. It takes up a huge amount of space in the studio. It is really too much loom for me, lifting 54″ rock maple shafts at 70 years old is a challenge. Originally my daughter commandeered the loom after I wove a small piece of yardage, and there still sits, a very long warp, for rainbow dish towels, taken from a 1959 10-shaft draft from Robin and Russ. (I would have been four years old…) Since we had 12 shafts, she rewrote the draft to use all 12. She wove a couple of towels for gifts, but the warp still sits on what is essentially my loom. I bought it and paid for it.

I have found someone who wants it, The Fashion Institute of Technology in Manhattan. It will be used in their new renovated weaving studio. It seems fitting that it is going from RIT to FIT… The problem is, I’ve repeatedly asked my daughter to clear the warp, and after a number of months, I realize she isn’t going to. So…

First I had to figure out what she did. She doesn’t keep records, it is all in her head… I sat for a long time staring at weaving software and came up with the draft, based on the original, the current threading and tie-up.

I will tell you, by the time I finish this warp, I will have the leg strength of an ox, and a bunch of powerful back muscles. This is pretty tough on the body. But I am weaving the warp off. I do about 4 repeats at a time, and it adds up. She probably won’t be happy with me, it is her warp, but it is my loom, and I’ve given her plenty of opportunity to weave it off.

And, of course there are bins and bins of spinning fibers, which haven’t been touched in a ridiculous number of years. I joined my guild’s spinning study group, and we meet once a month and just sit around as friends and chat, and spin, or knit, or whatever someone is currently working on that’s portable. My goal is that at least once a month, I have devoted time to just sit and spin. And today, I plied the last of this mystery fiber I bought too many conferences ago, I’m thinking it is Merino and maybe Tencel, or all Merino, it is beautiful. You can tell I started spinning it years ago, and with a dozen year’s gap, the spin isn’t the same as what I spin now. But I’ll make something from it eventually. One bobbin at a time, one month at a time, and eventually the job gets done.

All of my Early Music ensembles are gearing up for spring concerts and recitals, and events. I have more playlists than I had last December if you can imagine that. So when I’m not rehearsing or practicing, I’m in the studio, tackling a task an inch at a time, a repeat at a time, a dye class module at a time, one day at a time…

Stay tuned…